You are here: Home Products Measurement Instruments TV Meters Remote Service TV Signal Analyzers ITM-20C Remote Service TV Analyzer
Document Actions

ITM-20C Remote Service TV Analyzer

ITM-20C Remote Service TV Analyzer

ITM-20С analyzer is designed for remote control of analog and digital СATV signal parameters. It should be placed in telecommunication nodes for continuous and automatic control of signal parameters

 

Features:

  • Level, C/N ratio measurements for channels with analog modulation
  • Level, MER & BER measurement for channel with digital modulation
  • Input RF and optical signal parameters measurements (optical receiver option)
  • Optical signal power measurements (optical receiver option)
  • Channel plan and single channel mode
  • Operating monitoring systems via ViewRSA software & SNMPv1 protocol
  • Security loop connection capability with the transmission of the reported violation into ViewRSA software and through SNMPv1 protocol
  • Firmware updating & device settings via WEB interface
  • Powered by an external DC source or via Ethernet network (PoE option)
  • DIN-rail mounting

ITM-20C schema 

 

ITM-20C analyzer is available in 4 modifications:
Title
ITM-20C-R
ITM-20C-R-POE
ITM-20C-O
ITM-20C-O-POE
RF input
+
+


Optical input


+
+
Powered by an external DC source
+
+
+
+
Power over ethernet (PoE)

+

+

 

Specifications
Operating frequency range, MHz
44 to 1006
Frequency resolution, kHz
125
Level measurement range, dBµV
30 to 90
Level measurement accuracy, dB
±2
ITU-T J.83 Annex A/B/C, including DVB-C
Modulation type
QAM64, 128, 256 / ITU-T J.83 Annex A/B/C
Symbol rate, Msps
5 to 7
MER measurement range (DVB-C/QAM256), dB
28 to 40
MER measurement accuracy, dB
±2
BER measurement range, dB
5.0x10-3 to 1.0x10-8
RF input (for ITM-20C-R, ITM-20C-R-POE)
RF input connector type
75 Ohm, F-female
Optical input (for ITM-20C-O, ITM-20C-O-POE)
Operating wavelength range, nm
1200 to 1600
Measurement optical power range, dBm
-9 to +3
Operating optical power range, dBm
-8 to +2
Power measurement accuracy, dB
± 0,5
Optical connector type SC/APC
Other parameters
Power supply voltage, V
  • from an external DC source voltage, V
  • by Ethernet (PoE), IEEE 802.3af (for ITM-20C-R-POE, ITM-20C-O-POE modification)
8 to 24
Power consumption, W, less than
3
Control interface
Ethernet, RJ45/100Base-TX
Dimensions, mm
106x103x57
Operating temperature range, 0С 0 to +50

 


Personal tools