навигация
Новости
Приглашаем посетить наш стенд на выставке «МetrolEXPO-2018» April 10, 2018
Продление действия Свидетельства об утверждении типа для ОБЗОР-804/808 April 5, 2018
Приглашаем посетить наш стенд на выставке «ЭлектронТехЭкспо-2018» March 16, 2018
В программе головной станции BTA10 добавлена функция декодирования потока T2-MI. February 22, 2018
Приглашаем посетить наш стенд на выставке «Securika/MIPS-2018» February 21, 2018
Анализатор ИТ-100 внесен в реестр средств измерений РФ. February 12, 2018
Приглашаем посетить наш стенд на выставке CSTB’2018 December 25, 2017
График работы в праздничные дни December 21, 2017
Испытания векторных рефлектометров серии CABAN December 20, 2017
Анализатор ТВ сигнала мультисистемный ИТ-100 поддерживает измерение параметров качества приема IPTV потока September 13, 2017
 
Вы здесь: Главная Products Optical equipment Optical Nodes RFoG Optical Node
Действия с Документом

RFoG Optical Node



SUO 1000 (RFoG network node)

Key features:

  • Wide range of input optical power
  • System of automatic output power stabilization
  • High output level
  • Built-in equalizer
  • Compact die-cast housing
  • Modification (SUO1035) with UPS available



SUO1005/1035 Optical Nodes

are designed for operation in FTTH/FTTP networks, for example in RFoG networks. The Nodes allow sharing one optical fiber for reception and conversion of optical signal into RF signal in forward path, and conversion of RF signal into optical signal and its transmission in return path. The device does not require maintenance and is suitable for round-the-clock operation. The receiver part of the Node ensures operation at low levels of optical power, which allows for significant reduction of the number of active network components and thus improves its reliability.


SPECIFICATIONS
Model
SUO1005
SUO1035
FORWARD PATH
Optical wavelength
1550±10 nm
Input optical power
-6 to +2 dBm
Optical return loss
35 dB
Equivalent input noise current
5.5 pA/√Hz
Frequency range
75 to 1005 MHz (optional)
Flatness
±0.75 dB
Max output level CTB/CSO (42 ch, CENELEC)
98/98 dBµV
Level adjustment range
0 to 20 dB
Equalizer adjustment range
0 to 20 dB
RETURN PATH
Frequency range
5 to 55 MHz (optional)
Flatness
±0.5 dB
Input level range
  • at IMA(III)В
  • at IMA(II)B
70 to 90 dBµV
  • -45
  • -45
Level adjustment range
0 to 12 dB
Noise factor
6 dB
Return loss
18 dB
Laser type
DFB
Optical wavelength
1310±40 nm
Output optical power
1 mW
Output optical power stability
±1 dB
Laser operating mode
Burst mode
Switchover time between modes
1.5 µs
GENERAL FEATURES
Mains voltage
~187 to 244 V
Power consumption
12 W
Dimensions
155х115х60 mm
Temperature range
-20 to +55 °C
Optical connector
SC/APC (optional)
Connector type
F-female
Signal attenuation at test point
20 dB
Battery capacity*
-
7 A/h (12 V)
Battery life**
-
12 hours
Battery charging time**
-
20 hours
Protection class according to IEC529
IP40
* - optional
** - for 7 A/h 12 V battery

PLANAR also offers KR 7-12 Power Set, which includes:
  • 7-12 Battery
  • Battery mounting bracket
  • Clamping

 

Персональные инструменты