You are here: Home Products Optical equipment Optical Receivers TUZ Series Optical Receivers TUZ19 Series Optical Receivers with Built-in DVB-C Analyzer
Document Actions

TUZ19 Series Optical Receivers with Built-in DVB-C Analyzer

TUZ19 Optical Receiver is a up-to-date optical receiver with internal microprocessor control. It is designed for FTTx structures of CaTV. High output level allows to use the device for maintenance of huge amount of subscribers, and to reduce the number of active elements of a network. The slope and level adjusting, multifunctional 3-digit indicator and the multistage protection of all ports provide easy installation by any staff qualification. The device has a system of reservation by optical inputs. It is equipped with intellectual module for checking and controlling the device via Ethernet. The use of this system is allows the operator not only to increase controllability and reliability of the network, but also to organize some new services which increase the economic efficiency of network. The housing of receiver is built for 19’’ rack.

TUZ19 Optical Receiver
Features:
  • 19" rack housing
  • High output level
  • Electronic slope and level adjustments
  • AGC system
  • Input optical and output RF level indication
  • Wide range of input optical power
  • Remote monitoring and control
  • Built-in DVB-C spectrum analyzer
  • Models with redundancy by input are available

Model range:

m.2001.18 – one optical input
m.2003.18 – two optical inputs
m.2031.18 – one optical input, UPS
m.2033.18 – two optical inputs, UPS
m.4001.18 – one optical input, high output level
m.4002.18 – two optical input, high output level

SPECIFICATIONS
Models
model 200x.18
model 400x.18
model 203x.18
Frequency range
48 to 862 MHz
(1000 MHz optional)
48 to 1000 MHz
48 to 862 MHz
Bypass flatness
±0.75 dB
Output level (CTB/CSO < -60 dB, CENELEC, 42 ch), flat, not less
110 dBuV
114 dBuV
110 dBuV
Input optical wavelength
1200 to 1600 nm
Effective AGC range
-8 to +2 dBm
AGC modes
Off/by input power
Optical return loss
45 dB
Equivalent input noise current
4,5 pA/√Hz
Level adjustment range
0 to 20 dB
Slope adjustment range
0 to 18 dB
Return loss
18 dB – 1,5 dB/oct
RF connectors type
3/8" (F)
TAP attenuation
20 dB
30 dB
20 dB
Optical connector type
SC/APC
Main powering voltage
~180 to 250 V (110 V available)
Power consumption
14 W
21W
17W
Dimensions
482х187х43 mm 482х217х43 mm 482х187х43 mm
Weight
1.5 kg
2 kg
2 kg
Battery capacity
-
7 A/h, 12 V
Battery charging time
-
20 hours
Battery life
-
3.5 hours
Operating temperature
-20…+50°С

DVB-C Analyzser

Built-in DVB-C analyzer allows checking digital channel parameters and transmitting them to operator via Ethernet.

SPECIFICATIONS
Operating frequency range
45 to 1000 MHz
Frequency resolution
125 kHz
Level measurement accuracy
2 dB
Analog channel level measurement time, less than
500 ms
Digital channel level measurement time, less than
100 ms
Channel modulation types
QAM64, 128, 256 (Annex A)
Symbol rate
5 to 7 Msps
MER measurement range
22 to 42 dB
BER measurement range
5.0x10-3 to 1.0x10-8
MER measurement accuracy
2 dB
MER, BER measurement time including synchronization, less than
10 s

 

Built-in remote control allows transmitting optical receiver parameters to operator, and controlling the receiver via Ethernet.

Control interface

  • Remote control Ethernet 10/100Mbit
  • Local control Manually by buttons
  • Supported network protocols
  • Telnet (remote control)
  • SNMP (remote control)
  • HТTP (remote control)
  • TFTP (updating software)
  • DHCP (client)

User interface and indication

  • Remote control
  • TelNet
  • Web-interface
  • SNMP
  • Local control Manually controlling by using 3 built-in buttons
  • Indication Multifunctional 3-digit indicator
  • Active optical input indicator **

CHECKED PARAMETERS AND CONTROL

  • Max number of optical inputs** 2
  • Measured input optical power -11 to +3 dBm
  • Measured RF group signal 80 to 120 dBuV
  • Receiver temperature -9 to 99 °C
  • Supply power 5 to 15 V
  • Switching between inputs Manual
  • Automatic
  • AGC modes off by input signal
  • Alarm circuit status open/closed
**

- for models with 2 optical in/outs

 

Personal tools