Key features:
- Wide range of input optical power
- Remote monitoring via Ethernet
- Input optical power indication
- Two optical inputs with smart switches
- Active optical input indication
- High output level
- Automatic gain control system
- Built-in equalizer
- Two outputs
On demand
Price Options
On demand
On demand
Add to cart
Need a consult?
Our experts will answer any technical question
Ask a question
Models:
SDO1200 Model | CTB/CSO, flat/ 9 dB slope (dBµV) | AGC | Number of Optical Inputs | Power Supply | Remote Access via Ethernet/ Transponder Type | Note |
1200LCM | 108/112 | no | 1 | mains | yes/М1 | |
1210LCM | 108/112 | no | 1 | remote | yes/М1 | |
1230LCM | 108/112 | no | 1 | uninterrupted | yes/М1 | |
1202M | 112/116 | input | 1 | mains | yes/М1 | new |
1232M | 112/116 | input | | input | yes/М1 | new |
1201_2M3 | 107/111 | input | 2 | mains | yes/M4 | |
1202_M4.1 | 112/116 | input/ output | 1 | mains | yes/М4.1 | New |
1202_2M4.1 | 112/116 | input/ output | 2 | mains | yes/М4.1 | New |
SPECIFICATIONS | ||
Model | 1201 | 1202 |
Frequency range | 48 to 900 MHz | |
Flatness | ±0.75 dB | |
Max output level CTB/CSO (42 ch, CENELEC) | 107 dBµV (flat) | 112 dBµV (flat) |
Max output level CTB/CSO (42 ch, CENELEC) | 110 dBµV (9 dB slope) | 116 dBµV (9 dB slope) |
Level adjustment range | 0 to 20/6/12 dB | 0 to 21 dB |
Slope adjustment range | 0 to 18 dB | 3/6/9 dB |
Return loss | 18 dB (40 MHz) -1.5 dB/octave | |
Connector type | 5/8"(F) | |
Test point connector | F-quick | |
Signal attenuation at test point | 20 dB | |
Optical wavelength | 1200 to 1600 nm | |
Input optical power | -7 to +3 dBm | |
Effective AGC range | -5 to +2 dBm | |
Optical return loss | 45 dB | |
Equivalent input noise current | 4.5 pA/√Hz | |
Optical connector | SC/APC (optional) | |
Number of inputs | 2 | |
Optical power level at main input (1) for switching to backup input (2)* | -4 dBm | |
Optical power level at main input (1) for switching from backup (2) to main input (1)* | -3.5 dBm | |
Signal-to-noise ratio | 70 dB | |
Mains voltage | ~ 187 to 244 V | |
Power consumption | 15 W | 18 W |
Protection class according to IEC529 | IP64 | |
Weight | 1.5 kg | |
Dimensions | 195х140х100 mm | |
Temperature range | -20 to +55 °C |
SDO1201/1202 Series Plug-In Modules
Output Power Splitter | ||
SDM-00 | jumper | 0 dB |
SDM-04 | splitter | 4/4 dB |
SDM-08 | coupler | 2/8 dB |
SDM-12 | coupler | 2/12 dB |
SDM-16 | coupler | 1/16 dB |
SDM-20 | coupler | 1/20 dB |
STU-01.4 Transponder
The transponder is designed for transfer of optical receiver parameters to the control console via Ethernet.
Checked parameters | |
Input optical power | +6 to -12 dBm |
Active optical output number* | IN1/IN2 |
Supply voltage | +24 V, +15 V |
Baseband output level* | 80 to 120 dBµV |
AGC status | ON/OFF |
Temperature inside housing | 0 to +100 °C |
Alarm circuit status | K1/K0 (Open/Closed) |
* - variable parameters | |
Alarms and messages | |
| |
Communication network | Ethernet 10/100 Mbit, RJ45, twisted pair cat.5 |
Communication protocol | TCP/IP, UDP (client) |
Data transfer protocol | User-defined, via TCP/IP, UDP or SNMP |
Communication interface configuration |
|
STU-01.41 Transponder
The Transponder is designed for transfer of optical receiver parameters to the control console via Ethernet. Control interface | |
|
|
Supported network protocols | IP, UDP, DHCP, FTTP, SNMP, HTTP, Telnet, PLANAR Control Protocol |
User interface and indication | |
Remote control |
|
Local control |
|
Indicators |
|
Checked parameters* | |
Max number of optical inputs | 2 |
Measured input power | -11 to +3 dBm |
Measured baseband output power | 80 to 120 dBµV |
Temperature inside housing | 0 to 100 °C |
Internal source power |
|
Power supply and battery status check for optical receivers with UPS | Optional |
Event log volume | 20,000 events |
Optical receiver control | |
Switching between inputs |
|
AGC modes |
|
External devices operation | |
Number of security zones (discrete inputs) | 5 |
Circuit powered detectors | Supported |
Number of 0 to 30 V analog inputs | 3 |
Number of outputs controlling external devices at 50 V 1 A with overload protection | 2 |
Number of inputs for iButton devices | 1 |
* - Monitoring module is used for monitoring optical receiver parameters. Permissible limit values are set individually for each parameter. |