.jpg "Return Path Analysis Set")
On demand
ITM-20С analyzer is designed for remote control of analog and digital СATV signal parameters. It should be placed in telecommunication nodes for continuous and automatic control of signal parameters
Description
On demand
Price Options
On demand
Add to cart
On demand
- Support for DVB-C/T/T2 standards
- Level, MER and BER for channels with digital modulation
- Level, signal/noise for channels with analog modulation
- Working by channel plan and single-channel mode
- Software adjustment and updating via web-interface
- Monitoring of parameters via ViewRSA app, and via software that supports SNMPv1 protocol
- Possibility of connecting a security loop with reporting violation into ViewRSA software or via SNMPv1
- Powered by an external adapter or Ethernet network - PoE (optional)
- Mounting on DIN-rail
Description
On demand
Price Options
On demand
Add to cart
On demand
IT-19C analyzer was first presented at CSTB exhibition as an updated version of IT-09С. This analyzer is designed for measuring the TV channel parameters with analog and digital modulation. IT-19C has automatic setup parameter detection mode. This device is an indispensable assistant for a technical specialist working in the field, but it is also convenient and easy for stationary use. The analyzer’s interface is designed in such a way that after a few minutes of operation there is a feeling that you have been working with it for many years.
Description
On demand
Price Options
On demand
Add to cart
On demand
General Features:
- Compact handheld design (dimensions: 193x94x53 mm)
- Lightweight (weight with the battery up to 0.5 kg)
- Ergonomic housing design with protective bag
- Favorable price
- USB interface for PC connection
- Firmware update by the user
- Non-volatile datalogs
- 128x64 graphic LCD display with LED backlight
- Powered by Li-ion battery
- Battery charge or operation powered by 12V Mains Adapter or car lighter
Description
On demand
Price Options
On demand
Add to cart
On demand
IT-100 TV signals multisystem analyzer is designed to measure signals parameters of digital and analog television. The analyzer can be used when checking and servicing cable coaxial, fiber-optic or IP networks for receiving television and radio broadcasting, separate elements of network building and other radio electronic devices.
Description
On demand
Price Options
On demand
Add to cart
On demand
- Wide input measuring range: 40–126 dBuV
- Frequency range: 5–865MHz
- When works in return path analysis set:
- measures pilot signals of GPS-01 generators
- searches active GPS-01s
- measures spectrum of a return path
- measures frequency response of a return path
- receives auxiliary information from GPS-01s
- transmits results of all measurements through a forward path
- Measurement in the forward path:
- levels of carriers, carrier/noise, carrier/audio
- spectrum with a different frequency span
Description
On demand
Price Options
On demand
Add to cart
On demand
Price Options
On demand
Add to cart
.gif "GPS-01 Return path pilot generator")
On demand
- Generator can work in three modes:
- generation of unmodulated signal
- generation of pilot-signals
- generation of scanning signal for measuring of frequency response function
- The mode of GPS-01 is set with the computer, IT-081 or a built-in user interface
Description
On demand
Price Options
On demand
Add to cart
On demand
General Features:
- Compact handheld design (dimensions: 193x94x53 mm)
- Lightweight (weight with the battery up to 0.5 kg)
- Ergonomic housing design with protective bag
- Favorable price
- Dual LNB dish alignment
- Measurement of reception quality parameters: modulation error ratio MER, bit error ratio BER prior to and after Viterbi/LDPC decoder
- Audio Indication measurement mode
- Automatic defining of the settings (transponder frequency, symbol rate, FEC, polarization)
- Input DC voltage measurement within the range of 3 to 30 V
- LNB powering and DiSEqC 2.1 control
- Non-volatile datalogs
- Data logger function enabling storage of:
- up to 50 LNB profiles
- up to 99 satellite parameter pages with transponder table
- up to 100 measurement logs
- USB interface for PC connection
- Firmware update by the user
- 128x64 graphic LCD display with LED backlight
- Powered by Li-ion battery
- Battery charge or operation powered by 12V Mains Adapter or car lighter
- Built-in compass for satellite pointing (optional)
Description
On demand
Price Options
On demand
Add to cart
Handheld compact and lightweight instruments designed for control and adjustment of television distribution systems as well as their components including terrestrial and satellite antennas, optical devices, headends, amplifiers or complex CATV networks.
Key features:
- RELIABILITY
- WIDE RANGE OF FUNCTIONS AND EASY OPERATION
- MODERN, COMPACT, LIGHTWEIGHT AND ERGONOMIC DESIGN
- REASONABLE PRICE
.jpg)
