- High output level
- Electronic level adjustments
- AGC system
- Input optical and output electrical level indication
- Wide range of input optical power
- Built-in / electronic slope adjustment
- Compact due-cast housing
On demand
Price Options
On demand
On demand
Add to cart
Need a consult?
Our experts will answer any technical question
Ask a question
Models
- SDO3000 – single optical input
- SDO3001 – single optical input, remote control system
- SDO3002 – two optical inputs, remote control system
Specification | |||
| SDO3000 | SDO3001 | SDO3002 |
Frequency range | 48 to 862 MHz | ||
Bypass flatness | ±0.75 dB | ||
Output level (CTB/CSO < -60 dB, CENELEC 42 ch),
|
|
|
|
Input optical wavelength | 1200 to 1600 nm | ||
Input optical power range | -8.5 to +3 dBm | ||
Effective AGC range | -8 to +2 dBm | ||
AGC modes | off / by input power | ||
Optical return loss | 45 dB | ||
Equivalent input noise current | 4,5 pA/√Hz | ||
Level adjustment range | 20 dB | ||
Slope adjustment range | 0/6/9 dB (jumper) | 20 dB | 20 dB |
Return loss | > 18 dB | ||
RF connectors type | 3/8” (F) | ||
TAP attenuation | 20 dB | ||
Number of outputs | 1 | 1 | 2 |
Optical connector type | SC/APC | ||
HUM modulation | < -70 dB | ||
Main powering voltage | ~180 to 250 V (110V available) | ||
Power consumption | 12 W | 8,5 W | 9 W |
Dimensions | 165х155х60 mm | ||
Weight | 1.5 kg | ||
Temperature range | -20 to +50 °С | ||
Remote control | - | + | + |
Built-in remote control allows transmitting optical receiver parameters to operator, and controlling the receiver via Ethernet.
Control interfaces | |
|
|
Supported network protocols | IP, UDP, DHCP, FTTP, SNMP, HTTP, Telnet, PLANAR Control Protocol |
User interfaces and indication | |
Remote control |
|
Local control | Manually controlling by using 3 built-in buttons |
Indication |
|
Checked parameters and control | |
Max number of optical inputs | 2 |
Measured input optical power | -11 to +3 dBm |
Measured RF group signal* | 80 to 120 dBuV |
Receiver temperature | 0 to 100 °C |
Supply power | 5 to 15 V |
Log volume | 20000 events |
Switching between inputs |
|
AGC modes |
|
Alarm circuit status | K1/K0 (open/closed) |
Note: * - SENELEC, 42 ch. |